ORCOTAPE® OT-157TN is a pressure-sensitive, reinforced metalized polyvinyl fluoride tape used for fabrication, repair and installation of thermal/acoustic
aircraft insulation blankets. Meets the latest EU REACH, US EPA and Boeing environmental safety requirements. | PROPERTIES | TEST METHOD | SPECIFICATION |
|---|
COLOR | | Dull Gray |
|---|
WEIGHT | Fed Std 191, Method 5041
| 3.3 oz/sq. yd, max
112 g/sq. m, max
|
|---|
PEEL STRENGTH | ASTM D903 | 2.5 lbs/inch, min |
|---|
TENSILE STRENGTH | BMS 5-157
| 10.0 lbs/inch, min
|
|---|
FLAMMABILITY,
TAPE ONLY | BSS7230, Method F2; FAR Part 25 App. F Part I | Pass |
|---|
FLAMMABILITY,
TAPE/FILM COMPOSITE | BSS7230, Method F2; BSS7365;
FAR Part 25 App. F Part I
| Pass
|
|---|
FLAMMABILITY,
RADIANT PANEL TEST | FAR Part 25 App. F Part VI
| Pass |
|---|
SPECIFICATIONS | FAR 25.853, FAR 25.855, FAR 25.856 (a);
BMS5-157 Type I, III and IV, Class 1, Grade A, Form 1,
Composition MPVF;
DMS 1984 Type 6, Class 2;
NASA-KSC Group 1 | |
|---|
PACKAGING | Standard roll length
Standard width | 60 yards (55 meters)
2 and 3 inches (50.8 mm and 76.2 mm)
Custom widths available on request |
|---|
Note: To the best of our knowledge, information in the document is accurate. However, ORCON Aerospace does not assume liability for the accuracy or completeness
of the information provided. ORCOTAPE is a registered trademark of ORCON Aerospace. This revision replaces all previous revisions. Revised 02/2015. |
