Polyether ether ketone coated two (2) sides with a high performance acrylic PS adhesive and protected with a paper release liner.
|Excellent adhesion to covering films, as well as to fibrous insulation materials|
|Used for making, installing and repairing aircraft thermal/acoustic insulation blankets|
|Meets FAR 25.853, FAR 25.855, FAR 25.856(a)|
Conforms to BMS 5 157 current revision
|PROPERTIES ||VALUE||TEST METHOD*|
PEEL STRENGTH (48 HR DWELL)
|Alum: 45 oz. / in. ||
12.5 N / 25.4 mm
WEIGHT W/O LINER
|1.80-1.95 osy | 61-66.1 g/m2||LTM #25A|
|Two (2) years from date of manufacture when stored in|
original container under conditions of 70 degrees F. (21 degrees
C.) and 50% RH.
*Lamart Test Methods can be obtained through Lamart Corporation Customer Service.
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.