CONSTRUCTION | Lightweight APK™ film, scrim reinforced |
|---|
FEATURES | Very light-weight, easy to fabricate |
|---|
APPLICATION | Covering film for thermal and acoustic insulation
Meets FAR 25.856(a), FAR 25.855, FAR 25.853
Compatible with Lamart LT-16, LT-Hardware and LT-23MD tape |
|---|
| PROPERTIES | VALUE | TEST METHOD* |
|---|
PRODUCT WEIGHT (MAX.) | 0.67 osy | 22.7 gsm | LTM #25A |
|---|
BURSTING STRENGTH | 30 PSI | 207 KN/m2 | LTM #29A |
|---|
T-PEEL (HEAT SEAL) (MIN.) | 2.2 lb./in. | 9.8 N/25 mm. | LTM #30 |
|---|
PUNCTURE RESISTANCE (MIN.) | | |
|---|
5mm / 10mm / 20mm probe | 3.4# / 6.7# / 14.6# | 15N / 30N / 65N | LTM #26 |
|---|
TENSILE (MIN.) | 9 lb./in. | 40 N/25 mm. | LTM #23 |
|---|
TEAR (MIN.) | 3.4 lb. | 15 N | LTM #64 |
|---|
12 SEC VERTICAL | Pass | |
|---|
RADIANT PANEL | Pass | |
|---|
ROLL SIZES | 52 in. x 350 yds. | 1321 mm. x 320 m.
*Contact Customer Service for custom sizes. | |
|---|
HEAT SEALING | 260oF - 300oF | 127oC - 149oC | |
|---|
SHELF LIFE | Two (2) years from date of manufacture when stored in original carton under conditions of 70 degrees F. (21 degrees C.) and 50% RH. | |
|---|
*Lamart Test Methods can be obtained through Lamart Corporation Customer Service. Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material. |
