Suitable for moisture barrier and pressure sensitive binding tape projects, particularly in cableshield applications, where no heat is required to obtain a seal.
PRODUCT ID: SW-100
Laminated Tapes Engineered for the Wire and Cable Industry…
- 0.00092″ polyester film
- 0.00025″ acrylic pressure sensitive adhesive
- Pressure sensitive binding tape
- Moisture barrier tape
- No heat required to obtain seal
|Thickness:||0.0012 inch +/- 10%||ASTM-D-3652|
|Breaking Strength:||22 lbs./inch of width||ASTM-D-882|
|Tensile Strength:||16,923 p.s.i.||ASTM-D-882|
|Elongation at Break:||69 %||ASTM-D-882|
|Weight per Square Yard:||1.26 oz./sq.yd. +/- 10%|
|Yield:||12.6 sq.yds./lb. +/- 10%|
|Peel Strength:||Adhesion to stainless steel|
12 oz./inch of width
|Shelf life:||1year when stored under conditions of|
70 degrees F (21 degrees C) and 50% RH.
|P/N 61||Date: (Rev.1): 08/17/05|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.