PPF-250 TC SC
2 mil treated Polypropylene laminated to .00035″ aluminum foil,coated with acrylic adhesive and supplied on a release liner
Description
PRODUCT: PPF 250 TC SC 4506
DESCRIPTION: CUSTOM PRESSURE SENSITIVE PRODUCTS
APPLICATION SURFACE: POLYESTER
CONSTRUCTION:
.002″ Polypropylene, treated
.00035″ Aluminum Foil
.0008″ Acrylic Pressure Sensitive #4506
.00142″ Polyester Release Liner
ADHESIVE: Permanent Acrylic PSA
CHEMICAL PROPERTIES:
- Resistant to mild acids, alkalies, and salt.
- Fungus resistant.
- Water and corrosion resistant.
PROPERTY | VALUE | TEST METHOD |
Thickness: | .0033″ +/- 10% | ASTM-D-3652 |
Coating weight: | 2.2 grams/ft2 +/- 10% | Lamart Test Method #6 |
Adhesion: | 32 oz./in. minimum | ASTM-D-1000 15 minute dwell |
Release from liner: | 5-30 gms | LTM* 18G |
Opacity: | Opaque | |
Dimensional Stability: | Good | |
Color: | Silver | |
APPLICATION TEMP: | 50 degrees F. minimum | |
Shelf Life: | 1 year when stored under conditions of 70 degrees F. (21 degrees C.) and 50% R.H. | |
* Lamart Test Method | ||
Rev 1: 02/14/05 |
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.