PRODUCT ID: LV 400 C NTC 90/P
DESCRIPTION: GRAPHIC ARTS
Laminates and Coated Products Engineered for the Graphic Arts Industry
.004″ clear vinyl permanent acrylic adhesive 90 lb. stay-flat polycoated release liner
- Various adhesive systems, both permanent and removable, are available on a variety of release liners.
- Topcoating is available for improved ink adhesion.
Economical marking film that prints well and die cuts easily
Interior markings and moderate-term exterior markings, e.g., bumper stickers
- Solven resistance is good for most petroleum solvents and alphatic alcohols.
- Poor for ketones and esters.
- Excellent water resistance.
- Excellent resistance to humidity.
|Thickness:||0.0050″ +/- 10%||ASTM-D-3652|
|Adhesion:||40 oz/inch of width (# 03 adhesive)|
max. adhesion achieved after 72 hrs.15 minute dwell
|Application Temperature:||50 degrees F minimum, with standard 03 adhesive; lower application temperatures with other adhesives|
|Service Temperature Range:||– 40 to + 195 degrees F|
|Suggested Printing Methods:||Flexographic, Letterpress, Offset, Screen|
|Shelf Life:||Two year when stored under conditions of|
70 degrees F. (21 degrees C.) and 50% R.H.
|P/N 5082||Date 12/22/97|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.
"*" indicates required fields