LFM 200 HTC
.0016″ matte hard aluminum foil, top coated for printing, coated one side with acrylic adhesive and provided on a release liner
Permanent labels for appliances, dials or control panels where resistance to mild acids, alkalies and salt is required.
PRODUCT ID: LFM 200 H TC 90 U97
DESCRIPTION: GRAPHIC ARTS
Laminates and Coated Products Engineered for the Graphic Arts Industry
0.0016 matte hard aluminum foil, top-coated, acrylic PSA, 90 # liner
- Appliance labels, dials or control panels.
- Product Nameplates and instruction panels.
- Tamperproof labels
ADHESIVE: Permanent acrylic pressure sensitive
- Resistant to mild acids, alkalies and salt.
- Fungus resistant.
- Water and corrosion resistant.
PRINTING METHODS: Letterpress, Offset, Screen, Flexo
|Thickness:||(Foil + Adhesive): 0.0026” +/- 10%||ASTM-D-3652|
|Adhesion:||> 32 oz/inch of width||ASTM-D-1000|
15 minute dwell
|Service Temperature:||– 40 to 250 degrees F.|
|Application Temperature:||50 degrees F. minimum|
|Shelf Life:||1 year when stored under conditions of|
70 degrees F. (21 degrees C.) and 50% R.H.
|P/N 8753||Date 08/19/02|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.