HVAC/R foam tape
Aggressive acrylic adhesive
Resists extreme temperatures and moisture
Suitable for wrapping hot and cold pipe, fittings and tubing
prevents heat gain or loss
Prevents frost from forming on chilled water refrigeration tubing
Substrate: EPDM foam
Adhesive: Solvent Acrylic
Liner: 40-lb Kraft
- HVAC/R foam tape
- Aggressive acrylic adhesive
- Resists extreme temperatures and moisture
- Suitable for wrapping hot and cold pipe, fittings and tubing
- Prevents condensation
- prevents heat gain or loss
- Prevents frost from forming on chilled water refrigeration tubing
|Test||Typical Values(English)||Typical Values(metric)||Test Method|
|Peel Adhesion to Stainless Steel||30-oz/in||3.3-N/cm||PSTC-101|
|Foam Density||3 pcf||0.05 g/cm3
|Water Absorption||Max. 5% by weight||Max. 5% by weight||ASTM D-1056|
|Thermal Conductivity||0.25 btu In/ft3 at 75°F||0.036 W/mK||HC Internal|
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|Roll Width||Roll Length||Rolls/Carton||Carton/Pallets|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 8.27.2009 11:46.
Learn more about HiCube products at HiCube Coating