HC-191
An aggressive all-weather acrylic adhesive system
Bonds tightly and permanently to insulation facing and HVAC ducts
Performs well over a wide range of environmental conditions
Description
CONSTRUCTION
Substrate: 2-mil Aluminum foil with 5×5 Scrim
Adhesive: Solvent Acrylic
Liner: Silicone Coated Kraft
FEATURES
- An aggressive all-weather acrylic adhesive system
- Bonds tightly and permanently to insulation facing and HVAC ducts
- Performs well over a wide range of environmental conditions
TYPICAL PROPERTIES
Test | Typical Values(English) | Typical Values(metric) | Test Method |
Foil Thickness | 0.002-in | 0.02-mm | PSTC-133 |
Peel Adhesion to Stainless Steel | >50-oz/in | 5.5-N/cm | PSTC-101 |
Tensile Strength | 27-lbs/in | 47-N/cm | PSTC-131 |
Elongation | 3% | 3% | PSTC-131 |
Minimum Application Temperature | 10F | -12C | HC Internal |
Service Temperature Range | -25F to 250F | -32C to 157C | HC Internal |
APPLICATION
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
Roll Width | Roll Length | Rolls/Carton | Cartons/Pallet |
2.5-in | 150-ft | 16 | 48 |
3-in | 150-ft | 16 | 48 |
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 7.19.2011 16:08.
Learn more about HiCube products at HiCube Coating