HC-181
An aggressive all-weather acrylic adhesive system
Bonds tightly and permanently to insulation facing and HVAC ducts
Performs well over a wide range of environmental conditions
Meets or exceeds all UL181A-P/181B-FX requirements
UL Classified
Description
CONSTRUCTION
Substrate: 2-mil Aluminum foil
Adhesive: Solvent Acrylic
Liner: 60-lb Silicone Coated Kraft
FEATURES
- An aggressive all-weather acrylic adhesive system
- Bonds tightly and permanently to insulation facing and HVAC ducts
- Performs well over a wide range of environmental conditions
- Meets or exceeds all UL181A-P/181B-FX requirements
- UL Classified
TYPICAL PROPERTIES
Test | Typical Values(English) | Typical Values(metric) | Test Method |
Foil Thickness | 0.002-in | 0.02-mm | PSTC-133 |
Peel Adhesion to Stainless Steel | >60-oz/in | 6.6-N/cm | PSTC-101 |
Shear Adhesion | Meets all requirements | Meets all requirements | UL-181A-B PSTC-131 |
Tensile Strength | 25-lbs/in | 44-N/cm | PSTC-131 |
Minimum Application Temperature | 10°F | -12°C | HC Internal |
Service Temperature Range | -25°F to 300°F | -32°C to 184°C | HC Internal |
APPLICATION
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60°F to 80°F and low humidity, shelf life is one year from date of
purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
Roll Width | Roll Length | Rolls/Carton | Cartons/Pallet |
2.5-in | 180-ft | 16 | 48 |
3-in | 180-ft | 16 | 48 |
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 3.9.2010 14:09.
Learn more about HiCube products at HiCube Coating
Related Items
Contact us
"*" indicates required fields