HC-112
An aggressive rubber based adhesive system
Bonds tightly and permanently to insulation facing and HVAC
ducts
Foil conforms well to both fibrous and sheet metal ducts, as well
as many irregularly shaped surfaces
Description
CONSTRUCTION
Substrate: 1.6-mil Aluminum foil
Adhesive: Rubber
Liner: 60-lb Silicone Coated Kraft
FEATURES
- An aggressive rubber based adhesive system
- Bonds tightly and permanently to insulation facing and HVAC
- ducts
- Foil conforms well to both fibrous and sheet metal ducts, as well
- as many irregularly shaped surfaces
TYPICAL PROPERTIES
| Test | Typical Values(English) | Typical Values(metric) | Test Method |
| Total Thickness without Liner | 0.0032-in | 0.0813-mm | PSTC-133 |
| Peel Adhesion to Stainless Steel | 100-oz/in | 10.9-N/cm | PSTC-101 |
| Tensile Strength | 12.5-lbs/in | 22-N/cm | PSTC-131 |
| Elongation | 3% | 3% | PSTC-131 |
| Minimum Application Temperature | 0F | -18C | HC Internal |
| Surface Burning Characteristics | Flame ≤ 25 Smoke ≤ 50 | Flame ≤ 25 Smoke ≤ 50 | UL 723* ASTM E 84 |
*Tested in accordance with UL 723
APPLICATION
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
| Roll Width | Roll Length | Rolls/Carton | Cartons/Pallet |
| 2-in | 150-ft | 24 | 27 |
| 3-in | 150-ft | 16 | 27 |
| 4-in | 150-ft | 12 | 27 |
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 8.27.2009 12:48.
Learn more about HiCube products at HiCube Coating
Related Items
Contact us
"*" indicates required fields