2 mil aluminum foil coated on one side with a rubber adhesive. This tape is supplied on a release liner
Offers excellent initial tack and quick stick properties. Provides a permanent bond and vapor seal to sheet metal ducts as well as insulation facings.
PRODUCT ID: HC-110 TAPE
DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications
Backing: 0.002″ Aluminum
Adhesive: Rubber Base PSA
Interliner: 60 lb silicone Coated Kraft
- Dead soft aluminum foil tape is perfect for moisture and vapor barrier applications.
- Useful for sealing out dust and dirt for HVAC duct sealing and insulation facing applications.
- Dead soft aluminum foil is highly conformable to both irregular and curved surfaces, and offers excellent resistance to water and vapor transmission.
- Aggressive rubber PS adhesive is designed to offer excellent quick stick and ultimate adhesion.
|Thickness w/o liner:||0.0034 inch||PSTC-133|
Stainless Steel (15 minute dwell)
|100 oz./inch of width||PSTC-101|
|Tensile Strength:||>17 lbs./inch of width||PSTC-131|
|Elongation at Break:||>3.0%||PSTC-131|
|Surface Burning Characteristics|| Flame ≤ 25|
Smoke ≤ 50
| UL 723*|
ASTM E 84
|*Tested in accordance with UL 723|
|Shelf Life:||1 year when stored under conditions of|
60-80 degrees F. and low humidity
|Application:||Surface must be clean, dry and free of contaminants.|
Apply pressure with plastic squeegee.
|P/N 17623||Date: 9/22/11|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.