Substrate: 1.6-mil Aluminum Foil
Adhesive: Solvent Acrylic
- An aggressive acrylic adhesive system
- Bonds tightly and permanently to insulation facing and HVAC ducts
- Performs well over a wide range of environmental conditions
- Self wound to eliminate liner waste and increase installation efficiency
|Test||Typical Values(English)||Typical Values(metric)||Test Method|
|Total Thickness without Liner||0.0029-in||0.0737-mm||PSTC-133|
|Peel Adhesion to Stainless Steel||90-oz/in||9.9-N/cm||PSTC-101|
|Minimum Application Temperature||-25F||-32C||HC Internal|
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|Roll Width||Roll Length||Rolls/Carton||Cartons/Pallet|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 8.27.2009 12:43.
Learn more about HiCube products at HiCube Coating