An aggressive all-weather acrylic adhesive system
Bonds tightly and permanently to insulation facing & HVAC ducts
Performs well over a wide range of environmental conditions
Foil backing provides a durable vapor barrier
Substrate: 2mil Polyester/.0007” Al Foil
Adhesive: Solvent Acrylic
Liner: 66-lb Silicone Coated Kraft
- An aggressive all-weather acrylic adhesive system
- Bonds tightly and permanently to insulation facing & HVAC ducts
- Performs well over a wide range of environmental conditions
- Foil backing provides a durable vapor barrier
|Test||Typical Values (English)||Typical Values (metric)||Test Method|
|Total Thickness without Liner||0.004-in||0.010-mm||PSTC-133|
|Peel Adhesion to Stainless Steel||60-oz/in||6.8-N/cm||PSTC-101|
|Permeance||0.0||0.0||ASTM E 96|
|Minimum Application Temperature||-25F||-32C||HC Internal|
|Service Temperature||-50F to 300F||-45C to 149C||HC Internal|
Application surface must be clean, dry and free of contaminants. For best results, apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|Roll Width||Roll Length||Rolls/Carton||Cartons/Pallet|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 12.10.2010 17:41.
Learn more about HiCube products at HiCube Coating