PRODUCT ID: 883-L COPPER
DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications
Backing: 0.0014″ (1 oz.) Copper Foil
Adhesive: Acrylic; Conductive (Double Coated)
Interliner: One liner on each side of tape to facilitate die cutting and handling
In lay-up repair and prototype work where adhesive is required to bond two surfaces, and conductivity is required along, as well as through, the tape.
INSULATION CLASS: 155 degrees C.
|Thickness:||0.0034 inch +/- 10%||ASTM-D-3652|
|Peel Strength:||30 oz./inch of width||ASTM-D-1000|
|Breaking Strength:||20 lbs./inch of width||ASTM-D-1000|
|Elongation at Break:||4%||ASTM-D-1000|
|Conductivity through Adhesive:||10 miliohms|
|Mil Std 202/|
|Service temperature:||-40F / 325F|
|Shelf Life:||1 year when stored under conditions of 70 degrees F. (21 degrees C.) and 50% R.H.|
|P/N 680||Rev 1: 02/23/09|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.
"*" indicates required fields