UHMW has a low coefficient of friction, therefore offers excellent abrasion resistance for sound damping applications in the appliance and transportation industries.
DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications
Ultra high molecular weight polyethylene film with an aggressive pressure sensitive adhesive. 50DK silicone release liner available.
- UHMW has a low coefficient of friction, therefore offers excellent abrasion resistance.
- Perfect for sound dampening applications in the appliance and transportation industries and for conveyance applications where a slick, wear resistant surface is needed.
- Available in both logs and slit rolls.
|Film Thickness:||0.003″||0.005″||0.010″||(+/- 10%)||ASTM-D-3652|
|Adhesive Thickness:||0.0018″||0.0018″||0.0018″||(+/- 10%)||ASTM-D-3652|
|Total Thickness:||0.0048″||0.0068″||0.0118″||(+/- 10%)||ASTM-D-3652|
|Adhesion to Steel:||35 oz./inch 40 oz./inch||28 oz./inch||ASTM-D-1000|
(15 min. well)
|Breaking Strength:||18#||30#||60#||(lbs/inch of width)||ASTM-D-882|
|Taber Abrasion:||< 2.0 mg||< 2.0 mg||< 2.0 mg||(mg mass loss)||SAE-J-1847|
|Dry Dynamic Coefficient of Friction:||0.11-0.25||0.11-0.25||0.11-0.25||ASTM-D-1894|
|Shelf Life:||1 year when stored under conditions of 70 degrees F. (21 degrees C.) and 50% R.H.|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.