E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262


PRODUCT ID: 1113-78


  • 1113 is a general purpose 2 mil high tack, high shear rubber based transfer adhesive.
  • The adhesive adheres well to plastic, rubber and foam substrates.


  • 2.0 mil rubber transfer adhesive. Available on 60lb., 78Lb., 80lb kraft paper liners.
  • Also available on 8 and 12 Pt board stock.


  • High tack, high shear, exhibits good adhesion to closed cell sponge rubber, open cell urethane foam and polar substrates.
    PSTC 101
Method A
180° Peel Adhesion
20 min @ RT
Stainless Steel
85 ozs./in.
24 Hrs. @ RT
100 ozs./in.  
Shear Adhesion
1 X 1 X 1000g
2.2 PSI
Stainless steel
168 hrs
Procedure A
Rolling Ball Tack
1.0 inch PSTC 6
PN 19170    


Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table set 1
Part # PN19170
Adhesive Rubber
Description 2 mil unsupported rubber transfer PSA
Applications General Purpose high tack, high shear transfer tape. Good adhesion to plastic, rubber and foam.

AIMCAL logo LoResPSTC rtm 2013 WSLO