E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

150-3

PRODUCT ID:
UHMW TAPE

150-3 150-5 150-10
150-3L 150-5L 150-10L


DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications

PRODUCT:
Ultra high molecular weight polyethylene film with an aggressive pressure sensitive adhesive. 50DK silicone release liner available.

APPLICATIONS:

  • UHMW has a low coefficient of friction, therefore offers excellent abrasion resistance.
  • Perfect for sound dampening applications in the appliance and transportation industries and for conveyance applications where a slick, wear resistant surface is needed.
  • Available in both logs and slit rolls.
PROPERTY     VALUE     TEST METHOD
  150-3  150-5  150-10     
Film Thickness:  0.003"  0.005"  0.010"  (+/- 10%)  ASTM-D-3652 
Adhesive Thickness:  0.0018"  0.0018" 0.0018" (+/- 10%)  ASTM-D-3652 
Total Thickness:  0.0048"  0.0068"  0.0118"  (+/- 10%)  ASTM-D-3652 
Liner Thickness:  0.0032"  0.0032"  0.0032"  (+/-10%)  ASTM-D-3652 
Adhesion to Steel:  35 oz./inch 40 oz./inch    28 oz./inch    ASTM-D-1000
(15 min. well) 
Breaking Strength:  18#  30# 60#  (lbs/inch of width)  ASTM-D-882 
Elongation:  270%  300%  450%    ASTM-D-882 
Taber Abrasion:  < 2.0 mg  < 2.0 mg   < 2.0 mg   (mg mass loss) SAE-J-1847
Dry Dynamic Coefficient of Friction:  0.11-0.25  0.11-0.25  0.11-0.25     ASTM-D-1894
Shelf Life:
1 year when stored under conditions of 70 degrees F. (21 degrees C.) and 50% R.H.
       
P/N: self wound: 6893 6903 6904  
linered:   6997 6998 6999 Date 1/31/95


 

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table set 2
Part # 6893
Backing Material UHMW
Description 3 mil UHMW film with acrylic adhesive. This product is available with a liner or self wound
Applications UHMW has a low coefficient of friction, therefore offers excellent abrasion resistance for squeek and rattle applications in the appliance and transportation industries.

AIMCAL logo LoResPSTC rtm 2013 WSLO