PRODUCT ID: SW-200
Laminated Tapes Engineered for the Wire and Cable Industry...
Backing: 0.002" polyester film
Adhesive: Acrylic pressure sensitive
- Pressure sensitive binding tape
- Moisture barrier tape
- No heat required to obtain seal
|Film thickness:||0.002" polyester film - nominal||ASTM-D-3652|
|Adhesive thickness:||0.0003" +/- 0.00005"|
|Breaking Strength:||40 lbs./inch of width||ASTM-D-882|
|Tensile Strength:||19,000 p.s.i.||ASTM-D-882|
|Elongation at Break:||100%||ASTM-D-882|
|Weight per Square Yard:||2.48 oz./sq.yd. +/- 10%|
|Yield:||6.5sq.yds./lb. +/- 10%|
|Peel Strength:||Adhesion to stainless steel
12 oz./inch of width
|Shelf Life:||1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% RH.
|P/N 62||Date: 07/02/02|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.
|Table set 2|
|Description||2 mil clear polyester film, coated on one side with acrylic adhesive, self wound|
|Applications||A heavier gauge film version of the SW-100, designed for demanding holding and attaching requirements as well as protective and label protective applications.|