PRODUCT ID: 213-M-L TAPE
DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications
Backing: 0.003" Soft Aluminum
Adhesive: 0.002" Acrylic Pressure Sensitive Adhesive
Liner : Poly coated Kraft
Paint stripping, mask-off tape where exceptional resistance to paint stripping solvents, jet fuel, etc. is required.
SPECIFICATION: MIL-T-23397b, MIL-T-23397c
|Thickness:||0.005 inch +/- 10%||ASTM-D-3652|
|Peel Strength:||50 oz./inch of width||ASTM-D-1000|
|Breaking Strength:||26 lbs./inch of width||ASTM-D-1000|
|Elongation at Break:||5%||ASTM-D-1000|
|Shelf Life:||1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H.
|P/N 1203||Date: 05/21/07|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.
|Table set 1|
|Foil Thickness||3 mil|
|Description||3 mil aluminum foil coated one side with chemical resistant acrylic adhesive. This tape is supplied on a release liner.|
|Applications||Acts as an ideal maskant in electroplating applications when die cut parts are required. A linered version of 213-MX used in aircraft paint masking and stripping applications.|