E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

C-18-PS

PRODUCT: C-18-PS

CONSTRUCTION:

  • Backing: 0.0007"
  • Copper Foil /0.001"
  • Polyester Film Adhesive: Acrylic, Thermosetting
  • 90 lb. Release Liner


APPLICATION:

  • Electromagnetic and radio frequency shielding onmicrowave components, cables, antennas, motors, or cabinets.
  • Static drain.
  • Solderable and conductive.
  • Used as connector where mechanical connectors are not practical. Used for circuit board repair.
  • Interliner permits ease of die cutting.


INSULATION CLASS:

  • 130 degrees C.


CURE CYCLE:

  • 1 hour at 150 degrees C.
PROPERTY VALUE TEST METHOD
Signal Attenuation: 105dB @ 100 MHz ASTM D4935-99
Dielectric Strength: 5,000 volts ASTM D149
Thickness: 0.0033 inch +/- 10% PSTC-33
Peel Strength: >32 oz./inch of width ASTM-D-1000
Tensile Strength: 17,000 psi ASTM-D-882
Elongation at Break: >14% ASTM-D-882
Color: Copper  
Shelf Life:

1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H.

 
P/N 443   rev2: 07/18/07

Values are not intended for Engineering Specifications. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material

COPPER
Copper Gauge .0007"
PET Gauge .00092"
Signal Attenuation dB@100 MHz) 105
Signal Test Method ASTM D4935-99
Dielectric Strength (Volts) 5,000
Dielectric Test Method ASTM D149

AIMCAL logo LoResPSTC rtm 2013 WSLO