E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

243-L

PRODUCT ID: 243-L LEAD

DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications

CONSTRUCTION:
Backing: 0.003" Lead Foil
Adhesive: Acrylic
Interliner: Polycoated Paper Liner

FEATURES / BENEFITS:

  • Highly conformable to both irregular and curved surfaces.
  • Aggressive acrylic PS adhesive is designed to offer excellent quick stick and ultimate adhesion.
  • Liner allows tape to be die cut into shapes.

 

APPLICATION

MASKING
Electroplating
X-ray plates
Chemical milling

SEALING
Radioactive canisters
Thermopane windows
  SHIELDING
Radiation barrier
DECORATIVE
Simulated lead windows
 

 PROPERTY VALUE TEST METHOD 
Thickness w/o liner: 0.004 inch +/- 10% ASTM-D-3652
Peel Strength: 35 oz./inch of width ASTM-D-1000
Breaking Strength: 10 lbs./inch of width ASTM-D-1000
Elongation at Break: 15% ASTM-D-1000
Color: Natural  
Shelf Life: 1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H. 
 
P/N 477   Rev 1: 04/26/07

   

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table set 1
Part # PN477
Adhesive Acrylic
Foil Thickness 3-mil
Description 3 mil lead foil coated on one side with an acrylic adhesive. This tape is supplied on a release liner.
Applications Often used for X ray plate masking and as a radiation barrier. An excellent choice as a mask to eliminate the chemical impacts of electroplating and chemical milling

AIMCAL logo LoResPSTC rtm 2013 WSLO