Substrate: 2-mil Aluminum foil
Adhesive: Solvent Acrylic
Liner: 60-lb Silicone Coated Kraft
- An aggressive all-weather acrylic adhesive system
- Bonds tightly and permanently to insulation facing and HVAC ducts
- Performs well over a wide range of environmental conditions
- Meets or exceeds all UL181A-P/181B-FX requirements
- UL Classified
|Test||Typical Values(English)||Typical Values(metric)||Test Method|
|Peel Adhesion to Stainless Steel||>60-oz/in||6.6-N/cm||PSTC-101|
|Shear Adhesion||Meets all requirements||Meets all requirements||
|Minimum Application Temperature||10°F||-12°C||HC Internal|
|Service Temperature Range||-25°F to 300°F||-32°C to 184°C||HC Internal|
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60°F to 80°F and low humidity, shelf life is one year from date of
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|Roll Width||Roll Length||Rolls/Carton||Cartons/Pallet|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 3.9.2010 14:09.