E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

HC-102

CONSTRUCTION
Substrate: 1.6-mil Aluminum foil
Adhesive: Solvent Acrylic
Liner: 60-lb Silicone Coated Kraft


FEATURES

  • An aggressive acrylic adhesive system
  • Bonds tightly and permanently to insulation facing and HVAC ducts
  • Performs well over a wide range of environmental conditions
  • UL Listed (UL File #R26374)

TYPICAL PROPERTIES

Test  Typical Values(English)  Typical Values(metric)  Test Method 
Total Thickness without Liner  0.0031-in 0.0787-mm  PSTC-133 
Peel Adhesion to Stainless Steel  90-oz/in  9.9-N/cm  PSTC-101 
Tensile Strength  12.5-lbs/in  22-N/cm  PSTC-131 
Elongation 3.5% 3.5% PSTC-131 
Minimum Application Temperature  -25F  -32C  HC Internal
Surface Burning Characteristics  5 Flame
20 Smoke 
5 Flame
20 Smoke 
UL 723
ASTM E 84 

APPLICATION
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.

SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.

STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)

Roll Width Roll Length Rolls/Carton  Cartons/Pallet
2-in 150-ft  24  27 
3-in  150-ft  16  27 
4-in  150-ft 12  27 

 

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.

Revision 2.7.2013 10:17.

AIMCAL logo LoResPSTC rtm 2013 WSLO