E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

M-2000 TC

PRODUCT ID: M-2000-TC-50DK

DESCRIPTION: GRAPHIC ARTS
Laminates and Coated Products Engineered for the Graphic Arts Industry

CONSTRUCTION:
Backing: 0.002" Metallized Topcoated Polyester Film
Adhesive: 0.0009" Acrylic Pressure Sensitive Adhesive
Interliner: 50 lb. Densified Kraft Release Liner

 

PROPERTY VALUE  TEST METHOD 
Tensile Strength:  20,000 psi minimum  ASTM-D-882 
Elongation:  90% minimum  ASTM-D-882 
Breaking Strength:  40 lbs per inch minimum  ASTM-D-882 
Yield:  5.5 sq. yards per lb  
Peel Strength:  32 oz. / inch minimum  ASTM-D-1000 
Release Value:  50gms / inch maximum LTM-18* 
*Lamart test method, available upon request    
Shelf Life: 1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H. 
 
 P/N: 185   Rev 1: 07/07/10 


Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table Set 3
Part # PN185
Total Thickness .0035"
Description 2 mil silver metalized polyester with acrylic adhesive, top coated for printing, provided on a release liner
Applications Designed for label materials that require a metal look in applications such as serial number plates and nameplates

AIMCAL logo LoResPSTC rtm 2013 WSLO