Substrate: 2-mil Aluminum foil
Liner: Self wound
- An aggressive rubber based adhesive system
- Bonds tightly and permanently to insulation facing and HVAC
- Foil conforms well to both fibrous and sheet metal ducts, as well
- as many irregularly shaped surfaces
- Self wound to eliminate liner waste and to increase installation efficiency
|Test||Typical Values(English)||Typical Values(metric)||Test Method|
|Peel Adhesion to Stainless Steel||100-oz/in||10.9-N/cm||PSTC-101|
|Minimum Application Temperature||0F||-18C||HC Internal|
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|Roll Width||Roll Length||Rolls/Carton||Cartons/Pallet|
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use.
Revision 8.27.2009 12:51.
|Table set 1|
|Foil Thickness||2 mil|
|Description||2 mil aluminum foil coated on one side with a rubber adhesive, provided in a self wound roll.|
|Applications||Provides a permanent bond and vapor seal to fibrous and sheet metal ducts as well as insulation facings. The low moisture vapor transmission rate offers an excellent solution for patching and sealing requirements|