E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

HC-110L

PRODUCT ID: HC-110 TAPE

DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications

CONSTRUCTION:
Backing: 0.002" Aluminum
Adhesive: Rubber Base PSA
Interliner: 60 lb silicone Coated Kraft

BENEFITS:

  • Dead soft aluminum foil tape is perfect for moisture and vapor barrier applications.
  • Useful for sealing out dust and dirt for HVAC duct sealing and insulation facing applications.
  • Dead soft aluminum foil is highly conformable to both irregular and curved surfaces, and offers excellent resistance to water and vapor transmission.
  • Aggressive rubber PS adhesive is designed to offer excellent quick stick and ultimate adhesion.
PROPERTY VALUE TEST METHOD
Thickness w/o liner: 0.0034 inch PSTC-133

Peel Strength:

Stainless Steel (15 minute dwell)
Per Test Method

100 oz./inch of width PSTC-101
Tensile Strength: >17 lbs./inch of width PSTC-131 
Elongation at Break: >3.0% PSTC-131
 Surface Burning Characteristics

 Flame ≤ 25

Smoke ≤ 50

 UL 723*

ASTM E 84

 *Tested in accordance with UL 723    
Shelf Life: 1 year when stored under conditions of
60-80 degrees F. and low humidity
 
Application: Surface must be clean, dry and free of contaminants.
Apply pressure with plastic squeegee.
 
 P/N 17623    Date: 9/22/11

 

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table set 1
Part # PN17623
Adhesive Rubber
Foil Thickness 2 mil
Description 2 mil aluminum foil coated on one side with a rubber adhesive. This tape is supplied on a release liner
Applications Offers excellent initial tack and quick stick properties. Provides a permanent bond and vapor seal to sheet metal ducts as well as insulation facings.

AIMCAL logo LoResPSTC rtm 2013 WSLO