E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262



Products Engineered to your Specifications

Backing: 0.002" Aluminum Foil
Adhesive: Acrylic
Interliner: Silicone release liner


  • HVAC- Joining and sealing laminated fiberglass blankets, ducts, joints and seams for both rigid and flexible constructions.
  • Industrial – Moisture / vapor barrier, heat reflective, sealing out dust and dirt in underground cable applications.


  • Dead soft aluminum foil is highly conformable to both irregular and curved surfaces, offering excellent resistance to dust, dirt and water / vapor transmission.
  • Aggressive acrylic adhesive offers excellent adhesion and shear characteristics for HVAC applications.
  • Highly reflective aluminum tape surface, combined with a service temperature range of -40F to 350F (-40C to 177C), allows this tape to be used in a broad range of environments.
 Foil:  .002” (50 microns)  ASTM-D-3652
 Total thickness w/o liner  0.0033” (84 microns)  ASTM-D-3652
 Peel Adhesion:  45 oz./in. (21.3N/25mm)  ASTM-D-1000
 Breaking Strength:  17 # / in. (77N/25mm)  ASTM-D-1000
 Elongation at Break:  3.5% (3.5%)  ASTM-D-1000
 Service Temperature:  -40F to 350F (-40C to 177C)  
 Shelf Life: 1 year when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H.
 Application Conditions: Apply to clean, dry surface when surface temperature is between 50F and 105F (10C and 40C)  
P/N 16171    Rev1 : 10/29/09

Physical and performance values, characteristics, etc. shown above are obtained from recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. Values are not intended for Engineering Specifications. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

Table set 1
Part # PN16171
Adhesive Acrylic
Foil Thickness 2 mil
Description 2 mil aluminum foil coated on one side with acrylic adhesive
Applications Provides an economical solution for joining and sealing laminated fiberglass blankets, ducts, joints and seams for both rigid and flexible constructions.

AIMCAL logo LoResPSTC rtm 2013 WSLO