E-MAIL: This email address is being protected from spambots. You need JavaScript enabled to view it. PHONE: 973-772-6262

215-L

PRODUCT ID: 215-L TAPE

DESCRIPTION: PRESSURE SENSITIVE PRODUCTS
Products Engineered to your Specifications

CONSTRUCTION: Backing: 0.0018" Aluminum
Adhesive: Acrylic
Interliner: Densified Kraft

APPLICATION:

  • Dead soft aluminum foil tape is perfect for moisture / vapor barrier and heat reflective applications.
  • Useful for sealing out dust and dirt for underground cable and duct sealing applications.

BENEFITS:

  • Dead soft aluminum foil is highly conformable to both irregular and curved surfaces, and offers excellent resistance to water and vapor transmission.
  • Aggressive acrylic PS adhesive is designed to offer excellent quick stick and ultimate adhesion.
  • Highly reflective surface makes this tape ideal for under hood, wire harness applications.
  • Liner allows the tape to be die cut into shapes.
  • Tape can be made printable for label applications.

 

 PROPERTY  VALUE  TEST METHOD
 Thickness w/o liner:  0.0028 inch  ASTM-D-3652
 Peel Strength: 45 oz./inch of width  ASTM-D-1000

 Stainless Steel

 (15 minute dwell)  
 Per Test Method    
 Breaking Strength:  >12 lbs./inch of width ASTM-D-1000 
 Elongation at Break:  >2.5% ASTM-D-1000
 Color:  Silver  
 Shelf Life:  2 years when stored under conditions of
70 degrees F. (21 degrees C.) and 50% R.H.
 
 Service temperature:  -40F / 250F  
 P/N 473  
Date: (Rev.6)
12/11/11

 

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the datasheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

P/N 473 Date: (Rev.6) 02/16/11

Table set 1
Part # PN473
Adhesive Acrylic
Foil Thickness 2 mil
Description 2 mil aluminum foil coated on one side with acrylic PSA. This tape is supplied on a release liner.
Applications Provides a mechanical fastener designed to hold wires and cooling coils in appliances. Can also be used when a general purpose 2 mil foil is needed.

AIMCAL logo LoResPSTC rtm 2013 WSLO